Skip to product information
1 of 10

ATOMRC F405 NAVI Flight Controller

Regular price
$40.00
Regular price
$60.00
Sale price
$40.00
Shipping calculated at checkout.

    Take your flying to new heights with the ATOMRC F405 NAVI Flight Controller! With support for INAV/Ardupilot firmware, this controller is a must-have for any serious drone pilot.

    Specifications:
    • MCU: STM32F405RGT6, 168MHz , 1MB Flash
    • IMU: BMI270
    • Baro: SPL06-001
    • OSD: AT7456E
    • Blackbox: SD card Slot
    • 5x UARTs,
    • 8x PWM outputs
    • 1x I2C
    • 3x ADC (VBAT, Current, RSSI)
    • External Type-C port and Buzzer
    • Inverter on UART2-RX for SBUS

    Power:
    • 12~30V(3~6s Lipo)
    • 120A Current Sensor
    • BEC 5V 5A for servos
    • 9V 2A BEC for VTX and camera
    • FC Firmware
    • ArduPilot: ATOMRC F405NAVI
    • INAV: ATOMRC F405NAVI (INAV 5.0 or newer)

    Physical:
    • Dimensions: 30 *50*12mm
    • Mounting: 30*24mm, Φ3m
    • Weight: 21g

    Including:
    • 1x F405NAVI
    • 1x external USB(Type-C)/buzzer board + 12cm JST-SH-6P to JST-SH-6P cable
    • 20cm JST-SH-6P cable* for GPS/ DJI air unit
    • 35V 470uf Capacitor

    Manual:


    Purchase Instructions

    Our products belong to wireless video signal transmission device, which is solely intended for civilian entertainment purposes. Do not operate this product in violation of relevant regulations issued by local governments or other administrative authorities, so as to prevent unnecessary losses.

    ATOMRC F405 NAVI Flight Controller
    ATOMRC F405 NAVI Flight Controller
    ATOMRC F405 NAVI Flight Controller
    ATOMRC F405 NAVI Flight Controller
    ATOMRC F405 NAVI Flight Controller
    ATOMRC F405 NAVI Flight Controller
    ATOMRC F405 NAVI Flight Controller
    ATOMRC F405 NAVI Flight Controller
    ATOMRC F405 NAVI Flight Controller

    Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    J
    J. Bussin
    A+ Great Quality and Value FC for Wing

    Needed to make an FPV Wing , used the ATOMRC F405 Navi with INAV - Extremely happy with the purchase will be back for more!
    Do be aware this is sold as a kit so you have to solder and build the board - very fun and relatively easy only soldering on pin headers.